"Moulton Barn in the Grand Tetons" is part of our National Parks Series, and production is limited to 100 Slates of this design.
Our Stove Slates are not just images downloaded from the Internet. Each of the photos that adorn our Slates was taken by us during our trips across the country. Each Slate is numbered and produced as a limited production as part of a Series. The back of each Slate features the name of the Slate, the name of the Series, the number of the slate, the total number of that design produced, and an engraved map showing where the photo was taken.
This is a high quality laser- engraved slate insert for Harman P series pellet stoves. Rather than a semi-permanent installation with a frame or silicone, our inserts are mounted using rare-earth magnets, allowing you to easily change out your slate in seconds! These inserts perfectly fit Harman P43, PC45, P61, and P68 model stoves ash door recess. These slates may fit other pellet stoves or can otherwise be hung or displayed. Each slate measure approximately 12” x 9”. Due to the nature of the slate being a natural material, slight variations in appearance can occur.
To mount your slate in the ash door simply set the bottom of the slate in the bottom of the ash door recess and push it into place! To change out your slate, use a pick or small screwdriver on the top of the slate and tip it downward. Gently pull the installed slate out and pop the new one in! Our Slates are compatible with the Harman Ash Door Frame if you already have a trim kit, but it is not needed for our slates.
We offer a variety of popular designs with more being added every week. If you have a photo or a particular design that we don’t offer, we can create a custom slate for you using your image for an additional fee.
Our Stove Slates are not just images downloaded from the Internet. Each of the photos that adorn our Slates was taken by us during our trips across the country. Each Slate is numbered and produced as a limited production as part of a Series. The back of each Slate features the name of the Slate, the name of the Series, the number of the slate, the total number of that design produced, and an engraved map showing where the photo was taken.
This is a high quality laser- engraved slate insert for Harman P series pellet stoves. Rather than a semi-permanent installation with a frame or silicone, our inserts are mounted using rare-earth magnets, allowing you to easily change out your slate in seconds! These inserts perfectly fit Harman P43, PC45, P61, and P68 model stoves ash door recess. These slates may fit other pellet stoves or can otherwise be hung or displayed. Each slate measure approximately 12” x 9”. Due to the nature of the slate being a natural material, slight variations in appearance can occur.
To mount your slate in the ash door simply set the bottom of the slate in the bottom of the ash door recess and push it into place! To change out your slate, use a pick or small screwdriver on the top of the slate and tip it downward. Gently pull the installed slate out and pop the new one in! Our Slates are compatible with the Harman Ash Door Frame if you already have a trim kit, but it is not needed for our slates.
We offer a variety of popular designs with more being added every week. If you have a photo or a particular design that we don’t offer, we can create a custom slate for you using your image for an additional fee.